DelTang DSM2/DSMX Micro Receivers

UK designed and manufactured DSM2 ultra micro 2.4GHz receivers. All of these receivers are fully compatible with Spektrum, E-flite, Parkzone and older other DSM2/DSMX 2.4GHz transmitters and transmit modules. These receivers are not copies of Spektrum products. A low-power transmit module Tx1 is also available.

Most of the receivers have a built-in 2A brushed ESC - the Rx31 is also available without the ESC FET fitted to save weight. All of the receivers have the throttle signal available, either via a connector or solder pads, so you can connect an external ESC. If you do use an external ESC, simply ignore the brushed ESC connectors. Most receivers have more channels than sockets - the additional channels are available via circuit board pads. Many receivers are available in circuit-board-only form and require wires or connectors to be soldered to the circuit board pads. We can add lead-out wires and/or connectors to any of the receivers, please contact us to discuss your requirement.

Some of the receivers (Rx31d, Rx37-F, Rx41d and Rx43d) are available with twin on-board 2A brushed ESC. These can be used either to simply increase the current handling for twin motor installation or, by mixing-in aileron or rudder, to provide differential thrust steering.

The DT receivers are grouped into Servo and Actuator. Some Deltang receivers with reversible ESC for land-based models are still available - see Land R/C Components

 
Servo Rx (Top | Actuator Rx)

Receivers that can drive R/C servos. Several have sockets for some channels, all have circuit board pads for servo channels and ESC output. Some of the receivers have twin ESC which can be mixed with rudder or aileron for power steeing.

Rx31 : 4 chan ultra micro receiver (£ 25.00)
Size: 9.9 x 9.3 x 2 mm Weight: 0.23 gm Channels: 4 (R/E/T/A)
ESC: none Connectors: solder pads
Rx31d : 4 chan ultra micro receiver with twin ESC (£ 27.00)
Size: 9.8 x 10.2 x 2 mm Weight: 0.24 gm Channels: 4 (T/A/E/R)
ESC: 2 x 2A brushed (R/A mixing for thrust steering) Connectors: solder pads
Rx32d : 9 chan ultra micro receiver (£ 24.00)
Size: 11.1 x 12.0 x 2 mm Weight: 0.28 gm Channels: 9 (T/A/E/R/Gear/Aux1/Aux2/ch8/ch9)
ESC: none Connectors: solder pads
Rx33 : 7 chan (4 skt) micro receiver with JST-SH sockets (£ 31.00)
Size: 15.7 x 13.3 x 8 mm Weight: 0.65 gm Channels: 7 (R/E/T/A/Gear/Aux1/Aux2)
ESC: 2A brushed Connectors: 1mm JST-SH (R/E/T/A) solder pads (ESC/Gear/Aux)
Rx34d : 7 chan (4 skt) micro receiver with 1.25mm Molex sockets (£ 31.00)
Size: 16.5 x 11.7 x 8 mm Weight: 0.68 gm Channels: 7 (R/E/T/A/Gear/Aux1/Aux2)
ESC: 2 x 2A brushed with differential thrust steering Connectors: 1.25mm Molex (R/E/T/A) solder pads (ESC/Gear/Aux)
Rx35d : 7 chan (4 skt) micro receiver with JST-ZH sockets (£ 31.00)
Size: 17.0 x 12.1 x 8 mm Weight: 0.71 gm Channels: 7 (R/E/T/A/Gear/Aux1/Aux2)
ESC: 2 x 2A brushed Connectors: 1.5mm JST-ZH (R/E/T/A) solder pads (ESC/Gear/Aux)
Rx36 : 6 chan micro receiver with JR/Hitec conn (£ 25.00)
Size: 11.6 x 17.8 x 2 mm Weight: 0.38 gm Channels: 6 (R/E/T/A/Gear/Aux)
ESC: 2A brushed Connectors: solder pads (Rx36n) or JR/Hitec pins (Rx36v)
Rx37-F : 7 chan ultra micro receiver with twin ESC (up to 10V) (£ 29.00)
Size: 14.1 x 15 x 2 mm Weight: 0.33 gm Channels: 7 (R/E/T/A/Gear/Aux1/Aux2)
ESC: 2 x 2A brushed (R/A mixing for thrust steering) Connectors: solder pads
 
Actuator Rx (Top | Servo Rx)

Receivers with outputs for 1 or more magnetic actuators, some types will also drive servos.

Rx41d : single actuator ultra micro receiver with twin ESC (£ 27.00)
Size: 10.1 x 10.8 x 2 mm Weight: 0.28 gm Channels: 4 (R/E/T/A)
ESC: twin 2A brushed (R/A mixing for thrust steering) Connectors: solder pads (1 x actuator, 3 x servo, 2 x ESC)
Rx43d : triple actuator ultra micro receiver with twin ESC (£ 29.00)
Size: 11.8 x 12.9 x 2 mm Weight: 0.35 gm Channels: 4 (R/E/A/T)
ESC: twin 2A brushed (R/A mixing for thrust steering) Connectors: solder pads (3 x actuator, 1 x servo, ESC)